Technology used for our products
850°C glow wire test of diffuser of LED panel light According to EN 60598-1:2008+A11, clause 13.2： Resistance to heat: External parts of insulating material providing protection against electric shock, and parts of insulating material retaining current-carrying parts or SELV parts in position shall be sufficiently resistant to heart. The temperature of the glow wire must be as follows: 750°C: for general [...]
SafeCord™ Technology Have you been worried about the falling of the LED panel light with recessed installation? With SafeCord™ technology, SGSLight offers one safe cord for the recessed installation of the LED panel. It keeps the LED panel safely hang on the ceiling, in case any falling occurring. It is essentially recommended especially in [...]
Durable IK06 LED panel lights SGSLight TLP LED panel series have been tested by TUV and rated to be IK06. What is the IK rating? The IEC 62262 IK rating classifies the level of protection that electrical appliances provide against mechanic impacts from outside. IK rating is an international numeric classification for [...]
ElecCoat™ Technology How to get a white color frame and a cool frame at the same time? With ElecCoat™ technology, the thickness of the white (RAL 9016) coating is just 20 micrometer, the best cool white frame. Compared with the traditional painting frame, the ElectCoat™ is just one tenth of the thickness. It [...]
NanoGap™ Technology NanoGap™ is one of our key technologies to achieve high lumen efficacy and high quality. It is important to control the gap between LGP and the LEDs. 0.3mm gap is the best balance in lumen efficacy and quality. Each additional 0.1mm gap will cause the lumen reduce by 2%. But if [...]
